What 14 count means
Fourteen-count Aida has fourteen squares per inch, which is about 5.5 squares per centimetre. Count, HPI and stitches per inch are the same measurement. Almost every printed chart and kit assumes it, so if a pattern does not name a fabric, 14-count is the safe guess.
That single number is all the arithmetic you need: it links stitches to inches, inches to fabric, and fabric to what you cut.
The two formulas
Finished size — stitches ÷ 14 = inches, and stitches ÷ 5.5 = centimetres. A 140-stitch design is ten inches wide on 14-count.
Fabric to cut — finished size plus six inches (15.2 cm), three inches on each edge. The same 140-stitch design needs a sixteen-inch cut. Work height out separately from the row count; only a square chart needs a square cut.
Worked example
A chart 84 stitches wide and 105 rows tall, on 14-count Aida:
- Width: 84 ÷ 14 = 6 inches (15.2 cm)
- Height: 105 ÷ 14 = 7.5 inches (19.1 cm)
- Fabric to cut: 6 + 6 = 12 inches (30.5 cm) by 7.5 + 6 = 13.5 inches (34.3 cm)
That is the size the chart maker is working towards when you set a finished width: on 14 count, choose 84 columns and the piece will be six inches across. The cross stitch calculator does the same arithmetic for any count, either direction.
Size table for 14-count Aida
| Stitches across | Finished (in) | Finished (cm) | Cut with 3 in margins |
|---|---|---|---|
| 25 | 1.79 | 4.5 | 7.79 in / 19.8 cm |
| 50 | 3.57 | 9.1 | 9.57 in / 24.3 cm |
| 75 | 5.36 | 13.6 | 11.36 in / 28.9 cm |
| 100 | 7.14 | 18.1 | 13.14 in / 33.4 cm |
| 150 | 10.71 | 27.2 | 16.71 in / 42.4 cm |
| 200 | 14.29 | 36.3 | 20.29 in / 51.5 cm |
| 250 | 17.86 | 45.4 | 23.86 in / 60.6 cm |
| 300 | 21.43 | 54.4 | 27.43 in / 69.7 cm |
| 400 | 28.57 | 72.6 | 34.57 in / 87.8 cm |
14 versus 16 versus 18 count
The higher the count, the smaller the finished piece for the same chart — and the finer the detail you can fit into it.
| Count | Squares per inch | 100 stitches becomes | Usually chosen for |
|---|---|---|---|
| 14 | 14 (5.5 per cm) | 7.14 in / 18.1 cm | Kits, first projects, faster coverage |
| 16 | 16 (6.3 per cm) | 6.25 in / 15.9 cm | A middle ground for gifts and samplers |
| 18 | 18 (7.1 per cm) | 5.56 in / 14.1 cm | Detailed portraits, small pieces, jewellery |
Moving the same chart from 14 to 18 count shrinks it by about a quarter without losing a single stitch — which is why the fabric count has to be decided before the chart is drawn.
Strands and coverage
Two strands is the usual choice on 14-count: enough to cover the square without bulking up the cross. Three strands look fuller, but they can pull the holes open and make the crosses harder to lay flat — test on a scrap square first. Whichever you use, keep it consistent across the piece; mixed strand counts show up as shiny patches under a light.
Need the count/width the other way round? The cross stitch calculator converts a finished size into stitches, and stitches into fabric for 14, 16 or 18 count.
What to type into the chart maker for a six-inch piece
The arithmetic is settled by three controls on the chart maker — Aida count, Unit and Finished width. For a finished width of six inches on 14-count Aida:
| Control | Fill in | Why |
|---|---|---|
| Aida count | 14 | The count on the fabric, not on the chart |
| Unit | in | Or cm — 15.2 cm lands on the same grid |
| Finished width | 6 | 6 × 14 = 84 columns |
Finished width is the only size box on the page. There is no height box: rows are worked out from the shape of the photo, so a square photo gives 84 rows and a 4:5 photo straight off a phone gives 105 rows (84 × 5 ÷ 4 = 105). Only then is the finished size 6 × 7.5 inches.
Fabric to cut, using three inches per edge:
- Width: 84 ÷ 14 = 6 inches stitched, plus 6 = 12 inches (30.5 cm).
- Height: for the 105-row version, 105 ÷ 14 = 7.5 inches, plus 6 = 13.5 inches (34.3 cm).
Two limits matter before you pick the number. The tool accepts 1–220 columns and up to 300 rows. On 14-count Aida that is a maximum of roughly 15.7 inches wide by 21.4 inches tall: a portrait photo at six inches wide can pass 300 rows (anything taller than about 3.5:1), and the page then refuses the width with "Choose a width yielding 1–220 columns and up to 300 rows." Crop tighter, drop to 4 inches, or switch to a coarser count.
If the chart already exists and you only need numbers, use the cross stitch calculator instead: Stitches mode, 84 and 105, and it returns the finished size and the cut for 14, 16 or 18 count without any photo.
Frequently asked questions
How many stitches is six inches on 14-count Aida?
84 stitches. Multiply six by 14. If the chart says 84 stitches across, that is your six inches on 14-count Aida — the height is worked out separately, so a 84 × 105 chart is 6 × 7.5 inches.
How large is 100 stitches on 14 count?
100 ÷ 14 = 7.14 inches, which is 18.1 cm finished. Cut 13.14 inches — 33.4 cm — to leave three inches on each edge.
Is 14 HPI the same as 14-count?
Yes. Count, HPI and stitches per inch all mean the same thing: how many squares fit in one inch of fabric. Fourteen-count is the most common because most printed charts and kits assume it.
How do I convert a stitch count to fabric size?
Divide the stitch count by 14 for inches, or by 5.5 for centimetres, then add six inches (15.2 cm) for the margins. The table above has the common stitch counts already worked out.
How many strands of floss on 14 count?
Two strands is the usual choice and gives even coverage on 14-count. Three strands look fuller but can pull the holes open and make the crosses harder to lay flat — test on a scrap square before committing to a large area.
How much margin do I need to cut?
Three inches on every edge is the working minimum — it gives you room for a hoop and for finishing. If the piece will be framed or laced over board, add more; framers often want two inches beyond the design on each side.